|
Week
Five Assignments
Return
to Classroom
It is a necessity
that you read and follow all instructions for each assignment. Follow
the Assignment Turn-In Instructions below. Assignments must be turned
in by their due dates, according to the course "Schedule."
Turn-In
Instructions
Week Five Assignments
Assignment
Turn-In Instructions:
- Assignments
need to be scanned
into digital format (either .jpeg or .gif) and then submitted
to the course's WebCT Assignment Drop Box by the Assignment Due
Date. You can activate the course's WebCT Account by clicking
on this "Activate
Course WebCT Account" link
or via the "Activate Course WebCT Account" link located
on the course "Classroom" page.
Once you have entered WebCT > Click on the "Assignment
Dropbox" link > Select the appropriate assignment link
> Attach the File (.jpeg or .gif) > In the Subject Area
type the Assignment Title (i.e. Week One, Lettering Assignment;
Week Two: Assignment 2A; etc.) > Submit the Assignment.
Students guide
for using WebCT
- Hard copies
(the Actual Drawings) must be mailed on or before the Assignment
Due Date. By the Due Date, place the appropriate Weekly Assignments
in a Manilla Envelope and mail to:
JoBeth Halpin
Triton College - Room AT150
2000 Fifth Avenue
River Grove, IL 60171
Week
Five Assignments
- Read Chapter
3 pages 54 - 71 in your course text book (Ching book).
- Take the
Week Five Reading Assignment quiz. See the Week Five "Quiz"
link available in the course "Classroom" for more detailed
instructions.
- View the
Agenda Information for Week Five, via course "Classroom."
- View and
learn the Terminology for Week Five, via course "Classroom."
- Activate
Week Five's Lecture. Read all information and follow all instructions.
Lectures often give tips on properly completing assignments.
- Complete
the Plan Oblique Floating Planes assignment, Assignment 5A.
(Insert Assignment Information)
When submitting in the subject line label this assignment, Week
Five Assignment 5A.
- Complete
the Plan Oblique Shed Drawing assignment, Assignment 5B.
(Insert Assignment Information)
When submitting in the subject line label this assignment, Week
Five Assignment 5B.
- Complete
the Elevation Oblique Shed Drawing assignment, Assignment 5C.
Draw the elevation oblique of the shed using the elevation from
Assignment 3B as your base drawing. Draw the drawing at 1/8"
scale. Follow the instruction from Week 4 for the elevation oblique
of the cube. The finished drawing should have the correct line
weights. If you need help, return to the instructions for Line
Weights. Be sure to put the title and border on the drawing. Label
this assignment, Week Five Assignment 5C.
If
you have questions, post them in the "Week Five: Elevation
Oblique Shed Drawing" Discussion Forum.
- Complete
the Top View and Plan Oblique Stair Drawings, Assignment 5D.
(Insert
Assignment Image 5D)
This
assignment will put you to the test. Above is the elevation oblique
drawing of a set of stairs. Your assignment is to draw the top
view of these stairs and then draw a plan oblique of the stairs.
The elevation oblique shows the dimensions of the stairs. Draw
the top view and the plan oblique drawing at 1" scale. You
should have 2 different drawings. The finished top view and plan
oblique drawings should have the correct line weights. If you
need help, return to the instructions for Line Weights. Label
this assignment, Week Five Assignment 5D.
If
you have questions, post them in the "Week Five: Top View
and Plan Oblique Stair Drawings" Discussion Forum.
- Complete
the Shed Drawing, Assignment 5E.
(Insert
Assignment Image 5E)
This assignment is a puzzle. You may have noticed that the shed
for Assignment 5E is very similar to the shed we used for Assignment
3B and for the plan oblique and elevation oblique drawing we did
earlier this week. In this assignment we are going to use all
of our drawing skills . We are going to draw the top view, front
and side elevation of this fancy shed using orhtographic projection.
We are also going to draw the plan oblique of this shed. The first
step will be to draw the 2 dimensional drawings. Draw the top
view and then layout the elevations using orthographic projection.
It will take some thinking and a bit of vision to figure out what
this shed looks like. All of the information you need is here.
To finish your drawing use the correct line weight and put your
title block on the drawing. If you need help, return to the instructions
for Line Weights.
The final part of the assignment is to draw the plan oblique of
the fancy shed. Review the steps we used to draw the plan oblique
of the shed earlier this week. The finished plan oblique drawings
should have the correct line weights. If you need help, return
to the instructions for Line Weights. Label this assignment, Week
Five Assignment 5E. If
you have questions, post them in the "Week Five: Shed Drawing"
Discussion Forum.
- Once you
have completed and turned-in all work associated with Week Five
you may begin working on Week Six
material.
|